To Next PageTo Next Page
Need help?Do you have a question about the BT DieselWorks AutoSync and is the answer not in the manual?
General| Brand | BT DieselWorks |
|---|---|
| Model | AutoSync |
| Category | Diagnostic Equipment |
| Language | English |
Details the AutoSync module's buttons (A/B), status LED indicators (RED, BLUE, GREEN), and DIP switches.
Explains how the AutoSync automatically detects and configures to metric or US/SAE units via the vehicle's DIC.
Instructions on how to display the AutoSync main menu using cruise control or rear defrost buttons.
Identifies the back, home, and exit icons/buttons for navigating through the AutoSync menu screens.
Allows control of EFILive DSP or EZ Lynk SOTF tune levels for diesel vehicles.
Enables disabling of the Active Fuel Management mode on gas vehicles.
Activates exterior strobe light mode, flashing all exterior lights in sequence. Check local laws.
Activates cargo/bed lighting and reverse lights, and enables automatic reverse lights when shifting.
Displays live engine and transmission data, including boost, EGT, coolant temp, and gear.
Details the EGT sensor source and notes on its accuracy with aftermarket parts.
Accesses peak recorded data and mirrors minimized data to the Driver Info Center (DIC).
Enables viewing backup camera while moving and activating it with turn signals.
Explains the 'RVC Backup Lights' setting and its impact on camera power.
Raises engine RPM to ~1200rpm for warming, AC performance, or jump starting.
Function to read and clear powertrain diagnostic trouble codes (DTCs).
Locks the shifter in park when the vehicle is locked with the remote keyfob.
Provides automatic or manual control of the torque converter lockup.
Recommends manual lockup for specific uses like sled-pulling, not daily driving.
Initiates service/stationary or mobile/driving Diesel Particulate Filter regeneration.
Safety guidelines for parked DPF regen, including fire risk awareness.
Uses ABS module for line-lock/launch control; requires specific vehicle conditions for activation.
Advises against repeated use to prevent premature wear on ABS components.
Covers Allison transmission TAPS reset and fast learn procedures for calibration.
Guidance on when to use TAPS reset or Fast Learn, recommending consultation with a tuner.
Displays live data from stability/traction control: acceleration, oversteer, yaw rate, TCS torque.
Allows recording, recalling, and resetting of peak vehicle dynamics data.
Resets TPMS warning threshold pressure or disables the TPMS system entirely.
Explains the temporary warning message displayed after disabling TPMS.
Procedure for learning additional remote keyfobs to the vehicle; keyed ignition only.
Enables custom reprogramming of BCM, HMI, and radio for features like speed limiter disable.
Tests injector balance rates and high-pressure fuel injection pump health.
Provides acceptable values for injector balance rates in Park, engine warm.
Measures the vehicle's 0-60mph acceleration time and stores the fastest recorded time.
Highlights the importance of correct tire size and speedometer calibration for accurate timing.
Allows modification of DRL settings, including options for fog lights and LED DRLs.
Feature that automatically activates fog lights when high beams are engaged.
Enables opening and closing of side windows using the remote keyfob.
Disables video lockout features; includes a legal warning about use on public roads.
Clears and resets the VIN lock on radios and HMI modules for swapping.
Provides installation instructions for EFILive DSP-5/EZ Lynk SOTF switching.
Shows current AutoSync firmware version, serial number, build date, and platform info.
Details the process for setting up an account and updating firmware wirelessly via WiFi.
Explains how to use the vehicle's internal WiFi hotspot for firmware updates.
Describes an alternative method for updating firmware when away from WiFi range.
