BT Duet Mini - Safety information; General; Environmental; Setting up

Ringer on/off switch
Located on the
underside of the base
unit.
Use to switch the
ringer on or off.
At a glance
Safety information
General
Simply clean your BT Duet Mini
with a damp (not wet) cloth, or an
anti-static wipe. Never use household
polish as this may damage the
product. Never use a dry cloth as
this may cause a static shock.
Do not open the BT Duet Mini.
This could expose you to high
voltages or other risks.
Environmental
Do not expose to direct sunlight.
We recommend that you do not
place the product on antique/
veneered wood to avoid damage.
Do not stand your product on
carpets or other surfaces which
generate fibres, or place it in
locations preventing the free flow
of air over its surfaces.
Do not submerge any part of your
product in water and do not use
it in damp or humid conditions,
such as bathrooms.
Do not expose your product to
fire, explosive or other hazardous
conditions.
Setting up
Plan the location of your
BT Duet Mini
Situate your BT Duet Mini close
enough to a phone socket so that
the line cord will reach.
You can wall-mount your product, for
instructions see the ‘Wall mounting’
section.
1
Connect the handset
cord to the base
Plug the shortest end of
the coiled cord into the
handset and the longer end
into the back of the base
as shown below. Route the
cord through the grove.
To switch secrecy on
and off
During a call:
Press and hold the
SECRECY button.
While the SECRECY button
is being held down you
can talk to someone in the
room without your caller
hearing you but you will
be able to hear your caller.
Release the SECRECY
button to return to your
caller.
2
Connect the
telephone line cord
Plug the telephone line
cord into the base unit and
plug the other end into
the telephone wall socket.
Your BT Duet Mini is now ready for use
Using the
telephone
Making and ending calls
To make a call
Lift the handset and wait
for the dial tone.
Dial the telephone
number.
To receive a call
When the telephone rings
the incoming call light will
also flash.
Simply pick up the
handset.
To end a call
Replace the handset.
To redial the last
number called
Lift the handset and wait
for the dial tone.
Press the REDIAL button.
The last number called
will be dialled
automatically.
Secrecy
When on a call you can talk to
someone in the same room without
your caller hearing.
R
e
d
i
a
l
S
e
c
r
e
c
y
S
e
c
r
e
c
y
D
E
F
M
N
O
W
X
Y
Z
A
B
C
J
K
L
T
U
V
G
H
I
P
Q
R
S
R
e
d
i
a
l
S
e
c
r
e
c
y
Volume
8
0
79
546
21
3
R
Recall button
For use with a
switchboard/PBX and
some network services.
Please contact your
switchboard supplier
for more information.
For more information
on BT's Calling
Features, please call
Freefone
0800 800 152.
Secrecy button
Lets you talk to
someone in the
same room without
the person you are
calling hearing you.
Redial button
Press to redial the last
number you called.
In call speech volume
switch
Use to adjust the
volume of your caller’s
voice.
Incoming call light
Located on the top
of the handset.
Flashes when the
telephone rings to
indicate there is an
incoming call.
BT Accessories and
Replacement Items
For a full range of accessories and
replacement items for BT products
please call 0870 240 5522, or visit:
Duet Mini user guide 28/7/03 4:52 PM Page 2 (Black plate)