46
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
4. Scroll to
Ans & Rec
or
Answer only
and press .
5. Your message is then played back. If you want to delete it,
press during playback. Or press to save.
Answer settings
1. Press .
Answer machine
is displayed, press .
2. Scroll to
Ans. settings
and press .
3.
Answer Mode
is highlighted. Press . Scroll or to
select
Ans & Rec
or
Answer only
. Press to confirm.
4. Scroll to
Answer delay
and press . Scroll or to
select the setting you want and press to confirm.
5. Scroll to
Record time
and press . Scroll or to
select the maximum recording time for each message and
press to confirm.
6. Scroll to
Call Screen
and press . Scroll or to
select
On
or
Off
and press to confirm.
7. Scroll to
Alert tone
and press . Scroll or to
switch the message alert tone
On
or
Off
.
8. Press to return to the previous menu level.
Answering machine
Answer mode
Choose which outgoing message you
want played to callers.
Answer delay
Answer delay sets the number of times
your BT Freestyle 750 will ring before
the answer machine picks up your call
and starts playing the outgoing
message. You can change the Answer
Delay setting to between 2, 4, 6, 8
rings or Time Saver. The default
setting is for your machine to answer
after 6 rings.
For compatibility with BT 1571 (or
another voicemail service) do not set
the ring delay to more than 6 rings.
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer after
2 rings, if you do not have any
new messages, it will answer after 6
rings. This means you can hang up
knowing you have no new messages,
saving you time and the cost of the call.
Recording time
The default setting is 60 seconds.
Set the maximum message length:
30s, 60s, 120s or No Limit.
Message alert
Set your BT Freestyle 750 to
beep regularly to alert you when
you have new messages on your
answering machine.
To Next Page
Loading...
