BT HUDSON 1500 - Phonebook Transfer and Speed Dial

20
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Memory 1 is set as 1571.
Copy the phonebook to another handset
1. Press Menu. phoneBook is displayed, press SeleCt.
2. Scroll
to pBk trAnSfer and press SeleCt.
3. A list of available handsets registered to the base will be
displayed. Press
or
to highlight the handset you want
and press SeleCt.
4. The display will show Copying while the entries are being
transferred. If an entry matches an existing entry you will
be prompted on whether to overwrite it or not by selecting
either yeS or no on the receiving handset. If you do not
select yeS or no, the copy process will time out and show
trAnSfer error. You can cancel the transfer at any time
by selecting CAnCel.
Once copying is nished, the display will show CoMpleteD!
Press BACk to exit.
Speed dial
You can assign a number from the Phonebook to a 2-9 button
and dial that number just by pressing and holding the button.
Store or change a Speed dial number
1. Press Menu. phoneBook is displayed. Press SeleCt.
2. Scroll
to SpeeD DiAl and press SeleCt.
3. Scroll
or
to the 2-9 button you want and
press SeleCt.
4. no nuMBer is displayed. Press Menu then select eDit.
The Phonebook list is displayed.
5. Scroll
or
to the entry you want and press SeleCt to
show the entry detail and press SeleCt again to assign it to
the speed dial number. The display returns to the Speed dial
menu and shows the new entry.
6. Press BACk to return to the previous menu level.
A new entry will overwrite an
existing entry.
If the handset you are copying
to becomes full, the transfer will
stop and the handset will return
to idle mode.
Transfer will be terminated if any of
the following occurs: power fails to
the base, handset goes out of range,
handset is paged, there is a call to
the handset or an answering machine
message is played.