BT HUDSON 1500 - Backlight Time; DIM Mode; Auto Hang-Up

24
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Backlight time
Adjust the amount of time before the handset backlight switches off to
save battery power when in idle. Choose from 20, 40 or 60 seconds.
1. Press Menu, scroll
to hAnDSet SettingS and
press SeleCt.
2. Scroll
to BACklight tiMe, press SeleCt.
3. Scroll
or
to display 20 SeConDS, 40 SeConDS or
60 SeConDS and press SeleCt.
4. Press BACk to return to the previous menu level.
Dim mode
When dim mode is set to on (the default setting) and no buttons
have been pressed on the handset for the set backlight time out
(see above), the time will appear on the handset standby display.
To conserve battery power, you can turn the dim mode off and
the screen will then switch off and go completely blank, instead of
displaying the time. When any button is pressed on the handset,
the display will switch back on.
1. Press Menu, scroll
to hAnDSet SettingS and
press SeleCt.
2. Scroll
to DiM MoDe, press SeleCt.
3. Scroll
or
to display on or off and press SeleCt.
4. Press BACk to return to the previous menu level.
Auto hang-up
With Auto hang up switched on, you can end a call by placing the
handset on the base or charger. If you switch this off, you must
always press
to hang up.
1. Press Menu, scroll
to hAnDSet SettingS and
press SeleCt.
2. Scroll
to Auto hAng-up, press SeleCt.
3. Scroll
or
to display on or off and press SeleCt.
4. Press BACk to return to the previous menu level.
The default setting is 20 seconds.
The default setting is ON.
If you have auto hang-up set to off,
you can place the handset in the
charger and have a handsfree call, if
the battery charge is low.
The default setting is ON.