BT HUDSON 1500 - Clock & Alarm; Set Date;Time; Set Time Format; Date Format

26
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
If you make a mistake, press BACk
to delete.
Multi-handsets
When setting the time and date on
one handset, any other handsets
registered to the base are also
updated automatically.
If the time or date format is adjusted
then only the handset being used will
be updated, all others will need to be
changed independently if required.
Clock & alarm
Set date/time
1. Press Menu, scroll to CloCk & AlArM and press SeleCt.
2. Set DAte/tiMe is displayed. Press SeleCt.
3. Use the keypad to enter the date and the current time in 24
hour mode then press ok.
4. Press BACk to return to the previous menu level.
Set time format
Choose the 12 or 24 hour format. Default setting is 24 hours.
1. Press Menu, scroll
to CloCk & AlArM and press SeleCt.
2. Scroll
to Set forMAt and press SeleCt.
3. tiMe forMAt is displayed. Press SeleCt.
4. Scroll or
to highlight 12 hrS or 24 hrS and
press SeleCt.
5. Press BACk to return to the previous menu level.
Date format
Choose the date displayed in DD/MM or MM/DD format.
Default setting is DD/MM.
1. Press Menu, scroll
to CloCk & AlArM and press SeleCt.
2. Scroll
to Set forMAt and press SeleCt.
3. Scroll
to DAte forMAt and press SeleCt.
4. Scroll
or
to highlight DD/MM or MM/DD and press ok.
5. Press BACk to return to the previous menu level.