BT HUDSON 1500 - Set Alarm; Alarm Tone; Alarm Volume

27
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
The alarm icon will show on the
standby screen when set.
If you make a mistake entering
the time, press BACk to delete the
last digit.
Stop alarm ring
When the alarm goes off, press
Stop or any button on the handset.
Set alarm
You can set your alarm to ring once or at the same time every day.
If you want to stop the alarm setting, select Off.
1. Press Menu, scroll
to CloCk & AlArM and
press SeleCt.
2. Scroll
to AlArM and press SeleCt.
3. Scroll
or
to off, on onCe or on DAily and
press SeleCt.
If you select on onCe or on DAily, use the keypad to enter
the alarm time using the 24 hour clock format, e.g. for 7.30am
enter 07:30. Press ok.
4. Press BACk to return to the previous menu level.
Alarm tone
Choose from 3 different alarm ringtones.
1. Press Menu, scroll
to CloCk & AlArM and
press SeleCt.
2. Scroll
to AlArM tone and press SeleCt.
3. Scroll
or
to display MeloDy 1, 2 or 3 and
press SeleCt.
4. Press BACk to return to the previous menu level.
Alarm volume
Choose from low, MeDiuM or high.
1. Press Menu, scroll
to CloCk & AlArM and
press SeleCt.
2. Scroll
to AlArM voluMe and press SeleCt.
3. Scroll
or
to display the 3 appropriate settings and
press ok.
4. Press BACk to return to the previous menu level.
The default setting is Melody 1.
The alarm melodies are different to
the ringer melodies.