37
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
If you enter the incorrect PIN code
you will be allowed two further
attempts, if it is still incorrect you will
hear, “Thank you for calling”, and
your BT Hudson 1500 will hang up.
If you do not press any button for
more than 10 seconds, your BT
Hudson 1500 will hang up.
If you forget to switch on your answering machine
before leaving home
1. Call your number from another phone and let it ring. After 20
rings the machine will switch on and answer your call.
2. When you hear the outgoing message, press
*
and then
enter your system PIN (original setting 0000). Play back
your messages as shown below in ‘Operating your answering
machine remotely’.
If you do not choose to switch your answering machine On, it will
switch off when the call is ended.
Operating your answering machine remotely
1. Dial your phone number. When you hear your outgoing
message, press
*
. You will hear, “Please enter your
security code”.
2. Enter your 4 digit Remote Access PIN (default 0000), see page
38 for information about PIN. If you have new messages,
these will be played. Otherwise you will hear “You have no new
messages” followed by the main menu.
You can now use the keypad to operate your answering machine.
Follow the announcements and instructions you hear:
Play all messages
Play new messages
Skip back during messages
Delete during messages
Skip forward during messages
Stop playback during messages
Press repeatedly to select the answering machine mode:
AnSwer & reCorD, AnSwer only or AnSwering
MAChine off.
Play main menu
If the
*
is not recognised it may be
because you have deactivated the
remote access feature, see page 36
“Remote Access on / off” for details.
To Next Page
Loading...
