BT HUDSON 1500 - Call Barring On;Off; Set Call Barring Number; Reset

39
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Call barring on / off
1. Press Menu, scroll
or
to ADvAnCeD Set and
press SeleCt.
2. Scroll
to CAll BArring, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok.
4. BArring MoDe is displayed, press SeleCt.
5. Scroll
or
to on or off and press SeleCt.
6. Press BACk to return to the previous menu.
Set call barring number
You can enter up to four numbers to be barred.
1. Press Menu, scroll
or
to ADvAnCeD Set and
press SeleCt.
2. Scroll
to CAll BArring, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok.
4. Scroll
to BArring nuMBer and press SeleCt.
5. Scroll
or
to the barring number you want and
press SeleCt.
6. Enter the number you want to bar. You can put up to 4 digits.
Press ok to conrm.
7. Press
to return to standby.
Reset
You can re-set a handset to its default settings.
1. Press Menu, scroll
or
to ADvAnCeD Set and
press SeleCt.
2. Scroll
to reSet, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok.
4. Display shows ConfirM? Press ok to conrm or BACk
to cancel.
5. Press ok again. All settings are reset to their defaults, see the
following page.
This will delete all messages and clear
the calls list and redial list.
Phonebook entries will not be deleted
by a reset. To clear the phonebook
select the Delete All option from
the phonebook menu, see page 19.
You cannot bar emergency service
numbers 999 or 112.
When Call barring is set to On, the
standby screen shows BArring
MoDe on.