7
Paragon 400 ~ 7th Edition ~ 24th May ’01 ~ 3703
SETTING UP
6 Check Dial Mode setting (default TB)
Use the dialling mode switch on the underside
of your Paragon 400.
Your Paragon 400 should be pre-set to
TB which
gives you Tone dialling. This ensures the phone
will work with all modern digital exchanges.
If you do not get a dialling tone, try setting the
dialling mode to
P.
If you are connecting to a switchboard, check
with your switchboard operator or
communications manager which dialling mode
you need. Your Paragon 400 is approved for all
compatible switchboards.
5 Connect the telephone line cord
If you do not have a modern phone socket, call
Freephone 0800 800 150 and ask for a BT
engineer to come and fit the correct socket.
This is a chargeable service.
Your Paragon 400 is now ready to record
messages.
To Next Page
Loading...
