BT PARAGON 500 - Outgoing Message; Answer and Record; Answer Only

27
BT Paragon 500 – Edition 4 – 10.05.04 – 5840
Outgoing message
This is the message your caller hears when the answering
machine picks up their call. Your BT Paragon 500 comes
with two pre-recorded outgoing messages to choose from.
Answer and Record message
This allows your caller to leave a message for you.
The pre-recorded message is “Hello, your call cannot be
taken at the moment, so please leave your message after
the tone”.
Answer Only
This does not allow your caller to leave a message.
The pre-recorded message is “Hello, your call cannot be
taken at the moment, and you cannot leave a message, so
please call later”.
Answering machine
The default setting is Answer and
Record.
5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 27