BT PARAGON 500 - Remote Access; Set;Change Security Code

BT Paragon 500 – Edition 4 – 10.05.04 – 5840
You can operate your answering machine from any
modern phone by calling your BT Paragon 500 and
entering a 3-digit security code.
Set/change security code
The pre-set code is 123. You can change this to help
prevent unauthorised callers from listening to your
messages.
1. Press then scroll to
ANSWERING MACHINE SET-UP
and press .
2. Scroll to
SECURITY CODE and press . Display
shows
OLD CODE . Enter the code (original setting = 123).
Press .
3. Display shows
NEW CODE . Enter the new code and press
to confirm.


Menu
IMPORTANT
Keep a note of your remote access
code by writing in the boxes below.
Remote access32
5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 32