BTECH AMPLIFER USER MANUAL | visit us online for support at baofengtech.com
【Three Basic Options to Operate your Amplifier】：
Option 1:
Only connect to the Antenna Jacks on the Radio and Amplifier – Use the radio itself to operate the amplifier
Option 2：
Only connect to the Antenna Jacks on the Radio and Amplifier – Use the accessory jack on the radio to an external mic or
earpiece to operate the amplifier
Option 3:
Connect both to the Antenna Jacks and Audio jacks on the Radio and Amplifier – Use the supplied microphone and built in
speaker to operate the amplifier without using the radio itself.
The kit includes a KPG-22 to KPG-22 (Kenwood 2 Pin) Control Cable. You may need to use an accessory adaptor if your radio
does not use the KPG-22 2 Pin Standard.
To Next Page
Loading...