BTECH AMPLIFER USER MANUAL | visit us online for support at baofengtech.com
RF Exposure Compliance and Control Guidelines and Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the
following procedures.
Guidelines:
Do not remove the RF Exposure Label from the device.
User awareness instructions should accompany device when transferred to other users.
Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
Keep the device at least 40 cm away from the body. Keeping the device at the proper distance is important as RF exposure
decreases with distance from the antenna. The antenna should be kept away from the face and eyes.
Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF
exposure limits.
Use of non-approved antennas, batteries, and accessories cause the repeater to exceed the FCC RF exposure guidelines.
Contact your local dealer for the product's optional accessories.
【Supplied Accessories】
Mobile Mounting Bracket & Screw set
Radio to Amplifier RF cable
Radio to Amplifier Accessory Control Cable (KPG-22)
Speaker Microphone & Hanger
【Specifications】：
●Frequency range：
400MHz-480MHz AMP-U25 & AMP-U25D
●Power supply：DC 13.8V （±15%）
●Input RF power：2 - 6W （±10%）
●Output RF power：20 - 30W
●Current：4.0-5.5A
●Size：135*115*35mm
●Net weight：800g
To Previous Page
Loading...