EasyManua.ls Logo

BTI ENDORET PLASMATERM H-PLUS - Page 4

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENDORET
®
PLASMATERM H-PLUS
Page 4
EN
ENDORET
®
PLASMATERM H-PLUS
1. INTENDED USE:
The PLASMATERM H-PLUS is an oven designed to heat
and maintain at 37ºC or 56ºC Plasma Rich in Growth Fac-
tors (PRGF), within the scope of Endoret® technology.
Since its use implies handling blood fractions, the unit is
intended to be used exclusively by qualied health per-
sonnel in hospital or clinical environments.
2. DESCRIPTION:
The PLASMATERM H-PLUS is a robust and easy to opera-
te unit, thanks to its internal metal casing and its exterior
plastic cover which makes it highly resistant to external
damage.
The oven includes a door for accessing the internal cavity.
The door is easily blocked open to facilitate the manipu-
lation of the recipients.
Inside the cavity there is a tray for placing the plasma con-
taining recipients. The tray, made of anodised aluminium,
is resistant, light, extractable and easy to clean.
The front information panel of the oven has 4 light-emit-
ting diodes (leds) indicating at all times the operational
process being used.
The working temperature inside the oven is achieved by
air circulation. Hot air generated by a resistance located
inside an aluminum radiator is circulated by a fan to the
interior of the oven and then back to the radiator. The
overall control of the equipment is carried out by a micro-
processor, as well as the temperature control and protec-
tion systems.
WARNING:
Use only the tray supplied with the equipment.
ACCESSORIES
The unit is supplied without accessories.
WARNING:
Be sure to use recipients biocompatible and resis-
tant to 59 ºC. The maximum amount of plasma to be
placed inside the oven is 100ml. Exceeding the maxi-
mum amount will not guarantee the correct heating
of the plasma at the working temperature.
SPARE PARTS:
In order to supply any original spare parts, the code or
description of the component and the serial number of
the unit should be indicated.
WARNING:
BTI shall not be held responsible for damage that
may be caused by non-original spare parts. Use only
original spare parts.
3. CONTRAINDICATIONS AND
ADVERSE EFFECTS:
No contraindications or adverse eects have been iden-
tied.
Pregnant and nursing women: No extra precautions have
been identied.
Picture 1