Additional programming options
8
Logamatic 4211 - Subject to technical modifications.
60
z Select a heating circuit (Æ Chapter 7.6).
Example: Heating circ. 2
z Select the standard program "Program select. new" for this heating circuit
(Æ Chapter 7.10).
The display shows the blank screen "New switch.point".
Enter the first switching point (Monday – Friday, 05:00, 21 °C)
You can select days individually or in blocks:
– Monday – Thursday
– Monday – Friday
– Saturday – Sunday
– Monday – Sunday
Hold down "Weekday" and select the required day or block with the rotary
selector (here: "Monday-Friday").
Release "Weekday" to save your input.
Hold "Time" down, and select the required time with the rotary selector
(here: "05:00").
The display shows the new switching point.
Release "Time" to save your input.
Hold "Temp" down, and select the required temperature with the rotary selector
(here: "21°C").
You cannot freely enter any temperature here. Only the factory-set day and night
temperatures are available, which you can, however, modify yourself
(Æ Chapter 6.4).
Release "Temp" key to save your input.
To Next Page
Loading...
