Additional programming options
8
Logamatic 4211 - Subject to technical modifications.
61
Only after all three details (day/time/temperature) have been set for the new
switching point will it be automatically saved under "Own program" and the
heating circuit number (here: "2"). The saving process is not shown on the
display. The display shows the blank screen "New switch.point" for the next
switching point.
z Enter the second switching point (Monday – Friday, 21:00, 17 °C).
z Enter the third switching point (Saturday – Sunday, 09:30, 21 °C).
z Enter the fourth switching point (Saturday – Sunday, 23:30, 17 °C).
To enter the second to fourth switching points, you only need to repeat the
previous steps.
Only after all switching points have been correctly entered, press "Back" to
return to the permanent display.
Your heating program will now operate according to your "Own program". You
can call up your new "Own program" by pressing "Prog" and turning the rotary
selector.
To Next Page
Loading...
