Buderus Logamatic 4323 - DHW Monitor Data

Monitor data
21
Logamatic 4323 - Subject to technical modifications.
110
21.2 DHW monitor data
Using the monitor menu "DHW" you can display the data relating to the DHW
settings.
The displays depend on the settings selected under the "DHW" function.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Monitor" appears.
Press "Display" to call up a submenu (here: "Heating circ. 0").
The display shows the selected submenu.
Turn the rotary selector until submenu "DHW" appears.
The display shows the selected submenu.
Press "Display".
The calculated set value and the actual value for the DHW temperature are
displayed.
Possible operating modes:
– Off
– Constant operation
– Automatic night
– Automatic day
– Holiday
– Optimisation
– Thermal disinfection
– Reheating
– Daily heat-up
+
+
MONITOR
Heating circ. 0
MONITOR
DHW
DHW monitor
Optimise 120min
Automatic day
Temperature 60/57