Buderus Logamatic 4323 - Page 60

Heating circuit data
11
Logamatic 4323 - Subject to technical modifications.
60
The display shows the selected submenu.
Turn the rotary selector until submenu "Optimisation for" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "Stop").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
HEAT CIRC. DATA 2
Radiators
Heating system
HEAT CIRC. DATA 2
none
for
Optimisation
+
HEAT CIRC. DATA 2
Stop
for
Optimisation
Input range Factory setting
Optimisation
none
Start
Stop
Start/Stop
none