Buderus Logamatic 4323 - Page 84

DHW data
12
Logamatic 4323 - Subject to technical modifications.
84
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "DHW" appears.
Press "Display" to call up a submenu (here: "DHW").
The display shows the selected submenu.
Turn the rotary selector until "Therm. disinfect" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "yes").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
+
+
DHW DATA
yes
DHW
DHW DATA
no
Therm. disinfect
+
DHW DATA
yes
Therm. disinfect
Input range Factory setting
Thermal disinfection
no
yes
no