Buehler 39-1572 - Page 9

Grinding/Polishing
Effective 2008 To Order, Call Toll-Free 1-800-BUEHLER (1-800-283-4537) 25
Accessories for Grinder-Polishers
30-2008 Paper Holding Band, for
8″ (203mm) Diameter Platens.
46-2013 Paper Holding Band, for 12″
(305mm) Diameter Platens.
95-2825 Paper Holding Band, for 10″
(254mm) Diameter Platens.
40-2058 Cloth Clamp, for 8″ (203mm)
Platen. 46-2012 Cloth Clamp, for 12″
(305mm) Platen.
95-2826 Cloth Clamp, for 10″ (254mm)
Platen.
49-8002 Drive Adapter for Phoenix
®
4000 and PowerPro Systems Type
Specimen Holders, One Required for
Each Holder
60-2100 Single Force Specimen
Holder Plate,With Six 2″ (50mm)
Cavities. Use distance rings for smaller
size specimens.
60-2409 Specimen Holder, for 8″
(203mm) Grinder-Polisher,
Rectangular 1″ x 1¼″ (25mm x 32mm)
Size Specimens, 4 Specimens
60-2422 Specimen Holder, for 8″
(203mm) Grinder-Polisher, Teardrop
(Recommended for Extremely Hard
Materials), 1¼″ (32mm) Size
Specimens, 6 Specimens
60-2482 Specimen Holder, for 8″
(203mm) Grinder-Polisher, Barrel, 1″
(25mm) Size Specimens, 6 Specimens
60-2483 Specimen Holder, for 8″
(203mm) Grinder-Polisher, Barrel, 1¼″
(32mm) Size Specimens, 6 Specimens
60-2484 Specimen Holder, for 8″
(203mm) Grinder/Polisher, Barrel, 1¼″
(32mm) Size Specimens, 3 Specimens
60-2485 Specimen Holder, for 8″
(203mm) Grinder/Polisher, Barrel, 1½″
(38mm) Size Specimens, 3 Specimens
60-2499 Lift-Lock Drive Adapter, for
Central Force Specimen Holders on
AutoMet
®
and Vector
®
Power Heads
60-3001 Single Force Specimen
Holder with Retaining Rings, 4 x 1″
(25mm) Specimens
BuehlerVanguard® 2000 Fully Automatic Preparation System
40-3824 Plastic Dispensing Bottles, set of 7
48-8282 TechMet® Table Without Cabinet, 54″ x 36″ (13.7cm x
91.5cm)
60-2410 Specimen Loading Fixture
60-2411 Specimen Loading Plate, 8″ (203mm)
60-2482 Specimen Holder, Barrel, 6 x 1″ and 25mm, for 8″ (203mm)
Systems
60-2483 Specimen Holder, Barrel, 6 x 1¼″ (32mm), for 8″ (203mm)
Systems
60-2484 Specimen Holder, Barrel, 3 x 1¼″ (32mm), for 8″ (203mm)
Systems
60-2485 Specimen Holder, Barrel, 3 x 1½″ (38mm), for 8″ (203mm)
Systems
60-2486 Specimen Holder, Barrel, 6 x 30mm, for 8″ (203mm) Systems
60-2487 Specimen Holder, Barrel, 6 x 40mm, for 8″ (203mm) Systems
60-2499 Drive Adapter, for use with Lift-type Chuck - Barrel Holders
63-1001 Aluminum Platen for BuehlerVanguard® Systems, 8″
(203mm)
63-1002 Specimen Holder, Single Force, 6 x 1″ and 25mm Mounts
63-1003 Specimen Holder, Sinlge Force, 6 x 1¼″ (32mm) Mounts
63-1004 Specimen Holder, Single Force, 3 x 1½″ (38mm) Mounts
63-1005 Specimen Holder, Single Force, 6 x 25mm Mounts
63-1006 Specimen Holder, Single Force, 6 x 30mm Mounts
63-1007 Specimen Holder, Single Force, 3 x 40mm Mounts
63-1008 BuehlerVanguard® 2000 Apex® Platen
63-1022 Distance Rings, Central Force, 6 x 1″ (25mm)
63-1023 Distance Rings, Central Force, 6 x 1¼″ (32mm) and 30mm
Specimens
63-1024 Distance Rings, Central Force, 3 x 1½″ (38mm) and 40mm
Specimens
Accessories
In-Table/Tabletop & Flush Mount Grinder-Polishers