Buffalo Tools PPWASH20 - Product Specifications; Key Features and Dimensions

To Next Page

To Previous Page

PPWASH20 Portable 20 Gallon Parts Washer Assembly & Operating Instructions

GENERAL PRODUCT SPECIFICATIONS

FEATURES:

• 20 Gallon Tank Capacity / 12 Gallon Solvent Capacity

• Powder Coat Paint Finish / Heavy-Duty Steel Construction

• 120 Volts / 60 Hz Water Pump

• Fusible Link Arm & Steel Lid

• Max. Pump Output: 192 GPH flow rate (with flexible pipe)

• Max. Pump Output: 318 GPH flow rate (without flexible pipe)

• Recirculates 0.8-0.95 GPM of Solvent

• Flexible Chrome Plated Nozzle Adjusts For Full Coverage

SPECIFICATIONS

•

Rated Voltage 120V / 60 Hz

• Overall Dimensions: L x W x H 30 1/2" x 21 1/4" x 34 5/8"

• Tank Dimensions: L x W x H 28" x 19" x 10 2/5"

• Max Output Through Spigot: 0.8-0.95 Gallons/min

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE.

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. When unpacking,

check to make sure all parts listed are included. If any parts are missing or broken, please call Customer Service

at 1-636-532-9888.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE