RECOGNIZE SAFETY SYMBOLS, WORDS & LABELS
This is a safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death. WARNING indicates a potentially hazardous
situation, which, if not avoided, could result in death or serious injury.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions may result in electric
shock, fire and/or serious personal injury.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
The warning and safety instructions appearing in this manual are not meant to cover all possible conditions
and situations that may occur. Common sense, caution and care must be exercised when operating or
cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer about
problems or conditions you do not understand before operating the product.
GENERAL PRODUCT SPECIFICATIONS
FEATURES
● Use For Hauling, Pulling & Material Handling
● Cold Forged Steel Pinion Gear & Shaft
● Gear Ration 3.4:1
● Zinc Oxide Finish
● 32 Ft. Steel Cable
SPECIFICATIONS
Capacity 1/2 Ton (1,000 lbs)
1. Lock Lever
Cable Length 32 Ft
W1000 1,000 Lb Hand Winch Assembly & Operating Instructions
2
COMPONENTS
Observe the locations and functions of the various
3. Crank
Handle
components and controls of this tool.
1) Lock Lever
2) Hook
3) Crank Handle
2. Hook
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS
PRODUCT. When unpacking, check to make sure all parts listed on page 3 are included. If any parts are
missing or broken, please call Customer Service at 1-888-287-6981.
To Next Page
Loading...