g
h
i
‘click’
eng
21
g Fasten the two ends of the tensioning belt together
underneath the seat area. You should hear a click.
Pull the belt until it is tight..
h Now give shape to the seat by folding the seat pad
inwards.
i Attach the 2 hook and loop fasteners at the foot end to
the underneath the frame.
Important Assemble the seat before fitting it onto the
chassis. The seat cannot be placed on the frame
before assembly.
WARNINGS
• Ensure that the hook and loop fasteners and tensioning belt are fastened
properly.
To Next Page
Loading...
Need help?
General
