Tube maintenance
1.If the tube of the scooter is loose, tighten the 4 mounting screws in a counterclockwise
direction. Use a 2.5mm hex socket tool to secure.(Figure 5)
2 . Tighten the two screws of the stem base in a counterclockwise direction using a 5mm hexagon
socket tool.(Figure 6)
Folding stem maintenance
1. If there is a wide gap between the folding stem, adjust the folding mechanism on the folding
base using a 2.5mm hex socket tool. Unscrew the set screw in clockwise direction.(Figure 7)
2. In a counterclockwise direction, fasten the folding mechanism screw using a 3mm hex socket
tool. Use a 2.5mm hex socket tool to tighten the set screw.(Figure 8)
CAUTION
NOTE: ADHERE TO THE MAINTENANCE SUGGESTIONS WHEN THE
SCOOTER HAS BEEN IN USE FOR A LENGTHLY TIME.
25
MAINTENANCE
To Next Page
Loading...
