needs service. If your vehicle does start, the first ignition
key may be faulty. See
your
Buick dealer
or
a
locksmith
who can service the PASS-Key
I1
.
If
you
accidentally
use
a key that has a damaged or
missing resistor pellet, the starter won’t work and the
security light will flash. But
you
don’t have
to
wait three
minutes before trying one
of
the other ignition keys.
See your Buick dealer or a locksmith who can service
the Pass-Key
I1
TM
to
have
a
new key made.
If you’re ever driving and
the
“SECURITY” light comes
on and stays on,
you
will be able to restart your engine if
you
turn
it
off.
Your PASS-Key I1 system, however, is
not working properly and must be serviced by your
Buick dealer. Your vehicle is not protected by the
PASS-Key I1 system.
If
you
lose or damage a PASS-Key I1
TM
ignition key, see
your Buick dealer or
a
locksmith who can service
PASS-Key I1
TM
to have a new key made.
New
Vehicle
CLBreak-InSS
Your modern
Don’t drive
at
any one speed
--
f
--
for the first
500
miles
i804
km). Don’
make full-throttle starts.
fee
Avoid making hard stops for the first
~UU
miles
(322
km) or
so.
During this time your
I
new brake linings aren’t yet broken in. Hard
stops with new linings can mean prematl
wear and earlier replacement. Follow
this
I
“breaking-in” guidel’
To Next Page
Loading...
