For steady wiping at low speed,
turn
the band away
from you to the
“LO”
position. For high speed wiping,
turn
the
band further,
to
“HI.”
To
stop the wipers, move
t’
band to
“OFF.”
A
CAUTION:
Damaged wiper blades may prevent you from
seeing well enough to drive safely.
To
avoid
damage, be sure to clear ice and snow from the
wiper blades before using them. If they’re frozen
to the windshield, carefully loosen or thaw them.
If
your blades do become damaged, get new
blades or blade inserts.
Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
Windshield
Washer
At
the top
of
the multifunction lever there’s a paddle
with the word
“PUSH”
on it.
To
spray washer fluid on
the windshield, push the paddle for less than a second.
The washer will spray several times, then stop. Unless
they are already turned on, the wipers will operate at
low speed for several sweeps, then turn
off.
To
get more fluid on the windshield, push and hold the
paddle. Spraying will continue as long as the paddle is
held.
A
CAUTION:
’
Driving without washer
fluid
can
be
dangerous.
A
bad
mud
splash
can
block
your
vision.
You
could hit another
vehicle
or
go
off
the
road.
Check
your
washer
fluid
level
often.
In
freezing
weather,
don’t use
your
washer
until
the
windshield
is
warmed.
Otherwise
the
washer
fluid
can
form
ice
on
the
windshield, blocking
your
vision.
I
88
To Next Page
Loading...
