Turn
Signal and Lane Change Indicator
A
green arrow on the
instrument panel will flash
in the direction
of the turn
or lane change.
The
turn
signal has two upward (for Right) and two
downward (for Left) positions. These positions allow
you
to
signal a turn or a lane change.
To
signal a turn, move the lever all
the
way
up
or
down.
When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever
until the green arrow starts to flash.
Hold
it there until
you complete your lane change. The lever will return by
itself when you release it.
As
you signal a turn or a lane change,
if
the arrows don’t
flash but just stay on, a signal bulb may be burned out
and other drivers
won’t
see your turn signal.
If a bulb is burned out, replace
it
to help avoid an
accident. If the green arrows don’t go
or1
at all when you
signal a turn, check the fuse (see “Fuses” in the Index)
and
.for
burned-out bulbs.
To Next Page
Loading...
