To
Increase Speed
While
Using Cruise
Control
There are two ways to
go
to
a
higher speed. Here’s the
first:
1.
Use the accelerator pedal to get to the higher speed.
I
Here’s the second
way
to
go
to a higher speed:
1.
Move
the Cruise
switch from
“ON”
to
“Resume/Accelerate.”
Hold it there until you
get up
to the
speed you
want, and then release
the switch.
2.
To
increase your speed in very small amounts, move
the switch to “Resume/Accelerate” for less than half
a
second and then release it. Each time you do this,
your vehicle will go about
1
mph
(1.6
km/h)
faster.
2.
Push the button at the end
of
the lever, then release
the button and the accelerator pedal. You’ll now
cruise at the higher speed.
The accelerate feature
will
only
work after you have set
the Cruise Control speed by pushing the “SET” button.
To Next Page
Loading...
