Setting Cruise Control
I
Cruise control can be dangerous where you
can’t drive safely
at
a
steady speed.
So,
roads or in heavy traffic.
slippery roads. On such roads, fast changes
in tire traction can cause needless wheel
spinning, and you could lose control. Don’t
use cruise control on slippery roads.
,
don’t use your cruise control on winding
Cruise control can be dangerous on
If
your vehicle is in cruise control when the optional
traction control system begins to limit wheel spin,
the cruise control will automatically disengage. (See
“Traction Control System”
in
the Index.) When road
conditions allow
you
to safely use it again, you may
turn the cruise control back on.
If you leave your cruise control switch on when
you’re not using cruise, you might hit
a
button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch off until you want to use it.
1.
Move the cruise control switch to
ON.
2.
Get
up
to the speed you want.
3.
Push
in
the
SET
button at the end
of
the lever and
release it.
4.
Take your foot off the accelerator pedal.
To Next Page