Disconnecting the vehicle’s battery for up to a year will
not change the programmed mode
of
the Programmable
Automatic Power Door Locks.
Delayed
Locking
Delayed Locking allows the doors to be locked while
passengers are exiting the vehicle. This feature also
provides
a
brief time period after all the doors are
closed, but before the doors are locked, in which the
doors may be reopened. Delayed Locking
is
user
programmable for the enabling or disabling of
the feature.
Delayed Locking is activated when a door lock switch is
pressed while the key is not
in
the vehicle’s ignition, and
a
door
is open, The door lock switch may be either the
lock switch on the door or the lock button on the remote
keyless entry transmitter (see “Remote Keyless Entry”
later in this section for more details). The doors do not
lock when the lock switch is pressed, but instead, three
chimes are heard. These chimes indicate that the
Delayed Locking function has been activated.
You have three actions possible once Delayed Locking
is activated:
1.
Cancel the Delayed Locking by pressing the unlock
switch or by fully inserting the key in the ignition.
2.
Override the Delayed Locking feature and lock
the
doors immediately by pressing the lock switch a
second time.
3.
Let the Delayed Locking feature complete the
locking of the vehicle.
If you wish to let the Delayed Locking feature complete
the locking
of
the vehicle, no additional action
is
required. The Delayed Locking feature will lock the
doors automatically after all the doors have been closed
for a period
of
five seconds. During this five second
period, any door may be reopened, at which time the
three possible actions shown above are again available.
2-8
To Next Page