yellowblue
5-7
8. Now connect the black
negative (
-) cable to
the good battery’s
negative (-) terminal.
Don’t let the other end touch anything until the next
step. The other end of the negative (-) cable doesn’t go
to the dead battery.
It goes to a heavy,
unpainted metal part on
the engine of the vehicle
with the dead battery.
9. Now start the vehicle with the good battery and run
the engine for a while.
10. Try to start the vehicle with the dead battery. If it
won’t start after a few tries, it probably needs service.
11. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don’t touch each
other or any other metal. Replace the red positive (+)
remote terminal cover to its original position.
To Next Page
Loading...
