1-55
For second row center position do the following:
1. Remove the elastic cord from under the head
restraint of the second row driver’s side position.
2. Attach the elastic cord to the comfort guide on the
center passenger shoulder belt.
3. Be sure that the belt is not twisted and it lies flat.
The guide must be on top of the belt.
4. Buckle, position and release the safety belt as
described in “Center Passenger Position” earlier
in this section. Make sure that the shoulder belt
crosses the shoulder.
To remove and store the elastic cord, remove it from the
comfort guide. The elastic cord will go back under the
head restraint.
To Next Page
Loading...
