Easy Exit Seat
The control for this feature is located on the driver’s
door panel between buttons 1 and 2.
With the vehicle in PARK (P), the exit position can be
recalled by pressing the exit button. You will hear
a single beep. The driver’s seat will move back.
If the easy exit seat feature is on in the Driver
Information Center (DIC), automatic seat movement will
occur when the key is removed from the ignition.
See “EASY EXIT SEAT” under DIC Vehicle
Customization on page 3-65 for more information.
Further programming for automatic seat movement can
be done using the DIC. You can select or not select
the following:
• The easy exit seat feature
• The memory seat recall feature
For programming information, see DIC Vehicle
Customization on page 3-65.
2-48
2006 - Buick Lucerne Owner Manual
To Next Page
Loading...
