Then, without shutting off the engine, follow these steps:
For the 3.8L V6 engine the
transmission fluid dipstick
top is a round loop
with this symbol.
See Engine Compartment Overview on page 5-12 for
more information on location.
1. Pull out the dipstick and wipe it with a clean rag or
paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range, push
the dipstick back in all the way.
3.8L V6 Engine
5-23
To Next Page
Loading...
Need help?
General
