Infotainment System 7-9
Selecting a Band
Press the RADIO/BAND button to
choose AM, FM, or XM™,
if equipped. The last station that
was playing starts playing again.
Selecting a Station
Seek Tuning
If the radio station is not known:
Briefly press
s © or ¨ \ to
automatically search for the next
available station. If a station is not
found, the radio switches to a more
sensitive search level. If a station
still is not found, the frequency that
was last active begins to play.
If the radio station is known:
Press and hold
s © or ¨ \ until
the station on the display is
reached, then release the button.
Manual Tuning
Turn the
Z knob to select the
frequency on the display.
Favorites List
1. Press the
Z knob.
2. Select Favorites List.
3. Select the station.
Station Lists
1. Press the
Z knob.
2. Select AM or FM Station List. All
receivable stations in the current
reception area are displayed. If a
station list has not been created,
an automatic station search
is done.
3. Select the station.
Category Lists
Most stations that broadcast an
RDS program‐type code specify the
type of programming transmitted.
Some stations change the program
type code depending on the
content. The system stores the RDS
stations sorted by program type in
the FM category list.
To search for a programming type
determined by station:
1. Press the
Z knob.
2. Select FM Category List. A list of
all programming types available
displays.
3. Select the programming type.
A list of stations that transmit
programming of the selected
type displays.
4. Select the station.
The category lists are updated
when the station lists are
updated.
To Next Page
Loading...
