Infotainment System 33
To avoid damage to the CD player:
.
Do not use scratched or
damaged discs.
.
Do not apply labels to discs. The
labels could get caught in the
player.
.
Insert only one disc at a time.
.
Keep the loading slot free of
foreign materials, liquids, and
debris.
.
Use a marking pen to label the
top of the disc.
Loading and Ejecting Discs
To load a disc:
1. Turn the vehicle on.
2. Insert a disc into the slot, right
side up. The player pulls it in the
rest of the way. If the disc is
damaged or improperly loaded,
there is an error and the disc
ejects.
The disc automatically plays once
loaded.
Press
Z to eject a disc from the
CD player. If the disc is not removed
within a short period of time, it is
automatically pulled back into the
player.
Playing an Audio CD
1. Turn the TUNE/MENU knob to
highlight, then press the outer
ring of the TUNE/MENU knob to
select the CD screen button on
the Home Page or select CD
from the source pop-up to
display the CD main page.
2. Select the Menu screen button
to display the menu options.
3. Press the outer ring of the
TUNE/MENU knob to select the
option.
On the CD main page, the track
number displays and the Song,
Artist, and Album information
displays when available.
Use the following radio controls to
play the disc:
J (Play/Pause): Use to pause or
resume play.
s © (Previous/Fast Reverse):
.
Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than five seconds, it seeks
to the previous track. If longer
than five seconds, the current
track starts from the beginning.
.
Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.
¨ \ (Next/Fast Forward):
.
Press to seek to the next track.
To Next Page
Loading...