50 Seats and Restraints
To fold a seatback down:
1. Make sure the floor area in
front of the rear seats is clear.
2. Fully lower the head restraint.
See Head Restraints 0 42.
3. Slide the front seats forward
and place the front seatbacks
in the upright position. See
Seat Adjustment 0 43 and
Reclining Seatbacks 0 44.
4. Pull the strap on the front edge
of the rear seat cushion to
release the cushion. Tilt the
seat cushion forward toward
the front of the vehicle.
The seat cushion must be tilted
forward before the seatback is
folded down. Otherwise, the
seatback will not fold down
properly.
Rear Seat with Retainer Hook on
the Seatback
5. Make sure the safety belt is in
the retainer hook on top of the
seatback, if equipped.
Rear Seat with Retainer Hook on
the Seatback
6. Reach under the belt and pull
the lever on top of the seatback
to unlock the seatback.
A tab near the seatback lever
raises when the seatback is
unlocked.
To Next Page
Loading...
Need help?
General
