6
ELECTRONIC PRECISION SHIFT
DRIVER MODE CONTROL
The automatic transmission shi lever always starts
in a center position, represented by a dot on the
shi pattern displayed on top of the shi lever. The
selected gear position illuminates in red. Aer shi-
ing, the shi lever returns to the center position.
Park — Press the button (A) on top of the lever to
shi into Park.
To shi out of Park, with the ignition on and the
brake pedal applied, press and hold the shi lock button (B) on the le side of the lever
and select the desired gear.
Reverse — Press and hold the shi lock button (B) on the le side of the lever and move the
lever forward and then le to shi into Reverse.
Neutral — Move and hold the lever forward for 2 seconds to shi into Neutral.
Note: The transmission will not stay in Neutral for an extended period. It will automatically shi into Park.
Drive — Move the lever rearward to shi into Drive.
Tap Shi Mode — With the transmission in Drive, pull back on the lever to activate Manual
Mode. Press the le steering wheel paddle to downshi and the right paddle to upshi.
Pullback on the lever again to return to Drive.
To temporarily take control of gear selection while
in Drive (D), press either paddle behind the steering
wheel. Automatic shiing returns aer no manual
shis have occurred for 7 to 10 seconds.
The current gear will be displayed on the instrument
cluster. If current speed is too high or too low for the
requested gear, the shi will not occur.
Automated Car Wash Mode
There are different procedures for placing the transmission in Neutral with the engine on or
off and if the driver exits the vehicle. Refer to your Owner's Manual for each procedure.
See Driving and Operating in your Owner’s Manual.
The Driver Mode Control automatically adjusts the steering, suspension, and powertrain
tuning based on the selected mode.
Press the AWD button
F
to send power to all four wheels. The button indicator will stay
on when AWD is active.
Press the Mode button
F
to select Sport mode (for enhanced steering and suspension
performance) or Tow/Haul mode (when towing or hauling a heavy load). The current
mode is displayed on the Driver Information Center.
See Driving and Operating in your Owner’s Manual.
F
Optional equipment
B
A
To Next Page
Loading...
Need help?
General
