Buick ENCLAVE 2020 - Exterior Access and Convenience; Power Liftgate Operation; Universal Remote System

9
POWER LIFTGATE
Open/Close the Power Ligate
Press the Power Ligate button on the
Remote Keyless Entry (RKE) transmitter twice.
Press the Power Ligate knob (A) on the
driver’s door.
Press the touchpad on the ligate handle to
open the ligate.
Press the button next to the latch to close
theligate.
Programming the Ligate Height
Turn the Power Ligate knob to the 3/4 mode position.
Open the ligate.
Adjust the ligate manually to the desired height.
To save the setting, press and hold the button next to the latch until the turn signals ash
and a beep sounds.
Hands-Free Operation
F
To open or close the ligate hands-free, kick
your foot straight under the driver’s side of the
rear bumper, le of center.
The kick should take about 1 second and come
within 5 inches of the bottom of the bumper.
The RKE transmitter must be within 3 feet of the
ligate.
Projected Logo
F
The vehicle logo is projected on the ground near the rear bumper, indicating the kicking
motion location for hands-free operation, when an RKE transmitter is detected within 6 feet
of the ligate. The logo is shown for 1 minute, depending on operating conditions.
See Keys, Doors and Windows in your Owner’s Manual.
F Optional equipment
UNIVERSAL REMOTE SYSTEM
The Universal Remote System on the overhead
console enables your vehicle to control 3
different devices, ranging from garage doors
andgates to home lighting. Go to
homelink.com for detailed videos and instruc-
tions on how to program the Universal Remote
System. For additional assistance, call 1-800-
355-3515.
See Instruments and Controls in your Owner’s Manual.
A