13
DriverShiControlisamanualmodethat
allows the driver to manually select the range
of gears. It can be used to drive in a sportier
mannerortodownshiwhendrivingona
downhill grade to provide engine braking.
1.MovetheshilevertotheManual(M)
position.
2. Press the + (plus) or – (minus) button on the
shilevertoupshiordownshi.Thecurrent
gear will be displayed on the Driver Information Center.
Ifvehiclespeedistoohighortoolowfortherequestedgear,theshiwillnotoccur.
See Driving and Operating in your Owner's Manual.
CRUISE CONTROL
Setting Cruise Control
1. Press the On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
rotate the thumbwheel down to the
SET position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
Cancel
Press to cancel the Cruise Control but retain
the set speed in memory.
Pressing the brake pedal also will cancel
the Cruise Control.
Turn off Cruise Control or the vehicle igni-
tion to erase the set speed.
Adjusting Cruise Control
RES/+ Resume/Accelerate
Rotate the thumbwheel up to resume a set
speed. When the system is active, rotate
the thumbwheel up to increase speed.
SET/– Set/Coast
When the system is active, rotate the thumb-
wheel down to decrease speed.
See Driving and Operating in your Owner's Manual.
TIRE PRESSURE MONITORING SYSTEM
The
Low Tire Pressure warning light on the instrument cluster illuminates when one or
moreofthevehicle’stiresissignicantlyunderinated.Fillthetirestothepropertirepres-
sureslistedontheTireandLoadingInformationlabel,locatedbelowthedriver’sdoorlatch.
Current tire pressures can be viewed on the Driver Information Center Information menu.
Refer to your Owner's Manual for additional information about normal monthly tire maintenance.
See Vehicle Care in your Owner's Manual.
AUTOMATIC TRANSMISSION
To Next Page
Loading...
Need help?
General
