Buick Envista Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18181221) - 2025
210 Vehicle Care
To c
heck a fuse, look at the band inside the fuse.
If the band is broken or melted, replace the fuse.
Be sure to replace abad fuse with afuse of the
identical size and rating.
Replacing aBlown Fuse
1
. Turn off the vehicle.
2. Locate the fuse puller in the engine
compartment fuse block.
3. Use t
he fuse puller to remove the fuse from
the top or side.
4. If the fuse must be replaced immediately,
borrow areplacement fuse with the same
amperage from the fuse block. Choose
a vehicle feature that is not needed to safely
operate the vehicle. Repeat Steps 2-3.
5. Insert the replacement fuse into the empty
slot of the blown fuse.
At the next opportunity, see your dealer to
replace the blown fuse.