edge
of
the seatback. Here
is
how you should install the
comfort guides on the shoulder belts:
1.
Pull
the
elastic cord
out
from between the edge
of
the seatback and the interior body to remove the
guide from its storage clip.
-
3.
There
is
a
“button stop”
on
the shoulder belt that
keeps
the
belt from going too far into the retractor at
the top of the seatback. Pull the shoulder belt out
of
the retractor, and place the guide over the belt. Make
sure that the guide is between the button stop
on
the
belt and
the
retractor. Insert
the
two edges
of
the belt
into the slots of the guide.
1-27
To Next Page