Then, without shutting off the engine, follow these steps:
For the 3.9L V6 engine the
transmission fluid dipstick
top is a round loop
with this symbol.
See Engine Compartment Overview on page 5-14 for
more information on location.
1. Pull out the dipstick and wipe it with a clean rag or
paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
How to Add Automatic Transmission
Fluid
Refer to the Maintenance Schedule to determine what
kind of transmission fluid to use. See Recommended
Fluids and Lubricants on page 6-12.
3.9L V6 Engine
5-25
To Next Page
Loading...
