3.
Wipe the cloth over
the mast sections,
removing any
dirt.
4.
Wipe dry with a clean cloth.
5.
Make
the antenna go up and down by turning the
radio
or
ignition off and on.
6.
Then repeat if necessary.
I
NOTICE:
Don’t lubricate the power antenna. Lubrication
could damage
it.
NOTICE:
Before entering an automatic car wash, turn off
your radio to make the power antenna go down.
This will prevent the mast from possibly getting
damaged.
If
the antenna does not go down when
you turn the radio off,
it
may be damaged or
need to be cleaned. In either case, lower the
antenna by hand by carefully pressing the
antenna down.
If
the mast portion of your antenna is damaged, you can
easily replace it. See your dealer
for
a replacement
kit
and follow the instructions in the kit.
-
3-21
To Next Page
Loading...
