4.
Remove the electrical connector from the bulb by
lifting the lock tab and pulling it away from the
plastic base.
5.
To
reinstall the headlamp bulb assembly, attach the
electrical connector to the plastic base
--
making
sure the lock tab is over the lock. Put the small tab
into the small notch
in
the lamp. Put the retainer
on
and turn it slightly counterclockwise to lock it into
place.
Taillamp Bulb Replacement (Sedan)
For
the proper type of replacement bulb, see
“Replacement Bulbs”
in
the
Index.
1.
Open the trunk.
I
2.
Remove the nut from the
3
trunk trim assembly.
3.
Pull the taillamp assembly away from the body.
4.
Disconnect the electrical connectors from the
taillamp assembly.
5.
Remove the bulb.
6.
Reverse the steps with a new bulb.
6-28
To Next Page
Loading...
