4.
Run the vehicle’s safety belt through or around the
restraint. The child restraint instructions will show
you how.
5.
Buckle the belt. Make sure the release button is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
6.
To
tighten the belt, pull its free end while you push
down on the child restraint.
7.
Push and pull the child restraint in different
directions to be sure it
is
secure.
If
the child restraint
isn’t secure,
turn
the latch plate over and buckle it
again. Then see if it is secure.
If
it isn’t, secure the
restraint
in
a
different place
in
the vebcle
and
contact the child restraint maker for their advice
about how to attach the child restraint properly.
To
remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work for an adult or larger
child passenger.
Securing a
Child
Restraint
in
the
Right
Front Seat
Position
U
1-39
To Next Page
Loading...
