Twilight Sentinel (Option)
The Twilight Sentinel control below your LIGHTS
switch
twns
your headlamps on and
off
automatically by
sensing how dark it is outside.
To operate it, leave the LIGHTS switch
off
and move
the Twilight Sentinel control to any position but
off.
(The
off
position is when the white dot on the switch is
rotated all the way to the left.)
If
you move the control all the way
to
the right, your
lamps will remain on for
three
minutes after you turn the
ignition to
OFF.
If
you move the control toward the left,
the lamps will go
off
quickly when you turn the ignition
to
OFF.
You
can change this delay time from one second
to four minutes. When the Twilight Sentinel
is
turned
off,
use your LIGHTS switch to operate the headlamps.
Your Twilight Sentinel and
Daytime Running Lamps
(Canada Only) work with
the
light sensor
on
top
of
your instrument panel.
Doa’t cover it
up,
if
you
do,
it
will
read “dark”
ad
‘your
lamps will
come
on.
2-39
To Next Page
Loading...
