Removing
the Flat Tire and Installing the
Spare Tire
1.
Using the wheel wrench, loosen all the wheel nuts.
Don’t remove them yet.
2.
Attach
the
whee-l
wrench
to
the
bolt
at
the
end
of
the
jack.
Rotate
the
wheel wrench
clockwise to
slight1y.raise
the
lift
head.
A
CAUTION:
Getting under a vehicle when it is jacked up is
dangerous.
If
the vehicle slips off the jack, you
could be badly injured or kiIled. Never get under
a vehicle when
it
is
supported only by a jack.
NOTICE:
Raising your vehicle with the jack improperly
positioned will damage the vehicle or may allow
the vehicle to fall off the jack. Be sure to
fit
the
jack lift head into the proper location before
raising your vehicle.
5-23
To Next Page
Loading...
