Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use.
If
you will be
operating your vehicle in an area where the temperature
may fall below freezing, use a fluid that has sufficient
protection against freezing.
Adding
Washer
Fluid
I
The windshield washer reservoir is located
on
the
driver’s side
of
the engine compartment.
Open the cap labeled WASHER FLUID
OmY.
Add washer fluid until the tank is full.
NOTICE:
0
0
0
0
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
Don’t
mix
water with ready-to-use washer
fluid. Water
can
cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system.
Also,
water doesn’t clean
as
well
as washer fluid.
Fill your washer fluid tank only
three-quarters fun when it’s very cold.
This allmows for expansion, which could
damage the tank
if
it
is
completely full.
Don’t use radiator antifreeze in your
windshield washer. It can damage your
washer system and paint.
6-25
To Next Page
Loading...
